Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.     

空中目标多波段红外辐射特性描述与仿真分析

针对空中目标在复杂背景下的探测需求,根据实际目标的运动特性,分析目标在飞行高度、飞行姿态角改变时的辐射特点,基于MODTRAN计算得到大气辐射和衰减数据,建立目标的三维模型、热辐射和反射模型,搭建空中目标的红外成像仿真系统.分析和仿真结果表明:在中波波段,目标尾焰的红外辐射比蒙皮强很多,在长波波段,蒙皮的红外辐射比较强,仿真图像的细节比较多,尾焰的红外辐射虽然有所减弱,红外成像效果依旧很好;相同探测条件下,由于位置越高大气越稀薄,探测器的可探测距离会变得比较远.目标红外辐射特性的分析和红外仿真系统的搭建对缩短红外探测器的研制周期和进一步确定探测器波段和系统分辨率等指标提供了参考依据.     

OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长，实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像，并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异，表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.     

柱面微通道板的制备及其性能研究

针对未来空间天文学应用的超分辨率光谱成像仪器的需求，对低噪声柱面微通道板（MCP）的制备方法及其性能进行了研究. 提出了一种将光学抛光与热成型相结合的新的柱面MCP制备方法，利用不含放射性元素的低噪声MCP玻璃，制备出曲率半径为400mm、尺寸为30mm′46mm、长径比为80:1、通道直径12.5mm、通道间距15mm的柱面MCP，并将其与感应电荷楔条形阳极（WSA）组成光子计数探测器，对其暗计数率、分辨率进行了检测，暗计数率约为0.1counts/cm2×s.     

Carbon Dots (C‐dots) from Cow Manure with Impressive Subcellular Selectivity Tuned by Simple Chemical Modification

Improved cellular selectivity for nucleoli staining was achieved by simple chemical modification of carbon dots (C‐dots) synthesized from waste carbon sources such as cow manure (or from glucose). The C‐dots were characterized and functionalized (amine‐passivated) with ethylenediamine, affording amide bonds that resulted in bright green fluorescence. The new modified C‐dots were successfully applied as selective live‐cell fluorescence imaging probes with impressive subcellular selectivity and the ability to selectively stain nucleoli in breast cancer cell lineages (MCF‐7). The C‐dots were also tested in four other cellular models and showed the same cellular selection in live‐cell imaging experiments.     

A Disulfide Intercalator Toolbox for the Site‐Directed Modification of Polypeptides

A disulfide intercalator toolbox was developed for site‐specific attachment of a broad variety of functional groups to proteins or peptides under mild, physiological conditions. The peptide hormone somatostatin (SST) served as model compound for intercalation into the available disulfide functionalization schemes starting from the intercalator or the reactive SST precursor before or after bioconjugation. A tetrazole–SST derivative was obtained that undergoes photoinduced cycloaddition in mammalian cells, which was monitored by live‐cell imaging.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803     

Analysis of a Cahn–Hilliard–Brinkman model for tumour growth with chemotaxis

Phase field models recently gained a lot of interest in the context of tumour growth models. Typically Darcy-type flow models are coupled to Cahn–Hilliard equations. However, often Stokes or Brinkman flows are more appropriate flow models. We introduce and mathematically analyse a new Cahn–Hilliard–Brinkman model for tumour growth allowing for chemotaxis. Outflow boundary conditions are considered in order not to influence tumour growth by artificial boundary conditions. Existence of global-in-time weak solutions is shown in a very general setting.